In stockVaultLabs UAE
IGF-1 LR3 for UAE laboratories
IGF-1 LR3 100mcg is the smallest fill in the catalogue by three orders of magnitude — 100 micrograms of white lyophilised material in a sealed vial. Everything distinctive about handling this line follows from that number: nothing is weighed out, the whole vial is the preparation unit, and a careless transfer loses a meaningful fraction of the material. This page covers the format, the naming discipline around analog forms, and the documentation path. Identity data sits on the IGF-1 LR3 monograph. Supplied for in vitro laboratory research only.
Tested before release
Each catalogue batch is tested by an independent laboratory before release, then checked again on the VaultLabs certificate. The laboratory report for this lot is available on request, and the laboratory is named on that report.
Lot VL-IGF1-20260801 · 99.9%
Working at microgram scale
A 100 mcg fill is not a stock unit to be subdivided by weighing. Balance resolution, static and residue on transfer surfaces all become significant at that scale, so laboratories normally prepare the vial whole and aliquot the resulting solution instead. Plan the diluent volume before the vial is opened rather than after, and record it, because there is no second attempt with the same unit.
The vial itself deserves care on arrival: the lyophilised deposit at this mass can be a barely visible film rather than a recognisable cake, so a vial that looks empty is not evidence of a problem. Inspect against the printed record and the appearance note rather than against expectations formed from 10 mg peptide fills. The reconstitution calculator handles the arithmetic once your procedure has set the target concentration.
LongR3 is not R3, and neither is Des(1-3)
The catalogue line is the Long Arg3 analog, CAS 946870-92-4. The literature also carries R3 and Des(1-3) forms, and laboratories should regard all three as distinct analytical targets rather than as spellings of one material. A requisition or method that says only IGF-1 analog has not specified enough to order or qualify against.
Carry the full designation through the purchase order, the inventory row and the notebook entry. The failure this prevents is subtle and expensive: material that is genuinely what its certificate says arrives against a method written for a different analog, and nothing in the receiving check catches it because the mass and the family name both agree.
Documentation for a small-fill unit
Per-lot certificates are published to batch verification once uploaded, and the product COA index reaches the same records. Confirm the analog designation on the record as carefully as the lot string, and check whether the analysis is described as independent or supplier-generated. The COA interpretation guide covers the fields worth reading.
If a lot has no published record, raise a documentation request with the lot and order reference and hold the unit — particularly here, because a 100 mcg vial consumed in a single preparation leaves nothing to re-examine later if the paperwork turns out to be wrong.
Storage, dispatch and scope
Sealed vials are held cold and protected from light and moisture per the printed label and lot record, and allowed to equilibrate before opening. Dispatch covers the seven emirates with AED checkout; log the lot and time of receipt and move the parcel into cold storage before finishing the paperwork. Site policy sits in the research peptide storage guide, and adjacent catalogue context is covered in the CJC-1295 and IGF-1 LR3 comparison.
This is a research reagent supplied for in vitro laboratory work only. VaultLabs makes no claims about growth, physiology or performance, supplies nothing for human or animal use, personal use or medical application, and provides no administration or preparation guidance for living systems.
Frequently asked questions
A single nominal 100 mcg fill of lyophilised material in a sealed vial, labelled with catalogue name, strength and lot identifier. There is no larger fill in this line.
No. At that mass, balance resolution and transfer losses dominate. Prepare the vial whole against a diluent volume your procedure fixed in advance, then aliquot the solution.
Not necessarily. A 100 microgram deposit can present as a thin film rather than a visible cake. Check the appearance note on the printed record before raising a discrepancy.
No. Regard them as distinct analytical targets and carry the full designation through the requisition, inventory row and notebook entry so a method written for one analog is never satisfied with another.
All VaultLabs products are supplied strictly for laboratory and research use only. They are not intended for human consumption, medical use, personal use, or diagnostic use.


